Skip to content
PHOENIX TECHNOLOGIES, BANGALORE | 📞 Call us on 080 42100546, Mob : 7760459320 | Email : info@phoenixtechnologies.org
PHOENIX TECHNOLOGIES, BANGALORE | 📞 Call us on 080 42100546, Mob : 7760459320 | Email : info@phoenixtechnologies.org

Schneider ATV320U22N4C

Rs. 0.00
SKU ATV320U22N4C
Main
range of product

Altivar Machine ATV320

product or component type

Variable speed drive

product specific application

Complex machines

device short name

ATV320

format of the control block

Compact

product destination

Asynchronous motors

Synchronous motors
EMC filter

Class C2 EMC filter integrated

IP degree of protection

IP20 conforming to EN/IEC 61800-5-1

degree of protection

UL type 1 with UL type 1 conformity kit

type of cooling

Fan

network number of phases

3 phases

[Us] rated supply voltage

380...500 V (- 15...10 %)

supply frequency

50...60 Hz (- 5...5 %)

motor power kW

2.2 kW for heavy duty

motor power hp

3 hp for heavy duty

line current

8 A at 380 V for heavy duty

6.1 A at 500 V for heavy duty
prospective line Isc

5 kA

apparent power

5.3 kVA at 500 V for heavy duty

continuous output current

5.5 A at 4 kHz for heavy duty

maximum transient current

8.3 A during 60 s for heavy duty

asynchronous motor control profile

Voltage/frequency ratio, 2 points

Voltage/frequency ratio, 5 points
Flux vector control without sensor, standard
Voltage/frequency ratio - Energy Saving, quadratic U/f
Flux vector control without sensor - Energy Saving
synchronous motor control profile

Vector control without sensor

speed drive output frequency

0.1...599 Hz

nominal switching frequency

4 kHz

switching frequency

4...16 kHz with current derating

2...16 kHz adjustable
safety function

STO (safe torque off) SIL 3

SS1 (safe stop 1)
SMS (safe maximum speed)
SLS (safe limited speed)
GDL (guard door locking)
communication port protocol

CANopen

Modbus
optional communication modules

Communication module: CANopen daisy chain RJ45

Communication module: CANopen SUB-D 9
Communication module: CANopen open style terminal block
Communication module: EtherCAT RJ45
Communication module: DeviceNet
Communication module: Ethernet/IP
Communication module: Profibus DP V1
Communication module: Profinet
Communication module: Ethernet Powerlink
Complementary
variant

Standard version

output voltage

<= power supply voltage

permissible temporary current boost

1.5 x In during 60 s for heavy duty

speed range

1...100 with asynchronous motor in open-loop mode

speed accuracy

+/- 10 % of nominal slip 0.2 Tn to Tn

torque accuracy

+/- 15 %

transient overtorque

170...200 % of nominal motor torque

braking torque

<= 170 % with braking resistor during 60 s

regulation loop

Adjustable PID regulator

motor slip compensation

Automatic whatever the load

Not available in voltage/frequency ratio (2 or 5 points)
Adjustable 0...300 %
acceleration and deceleration ramps

S

U
CUS
Deceleration ramp automatic stop DC injection
Deceleration ramp adaptation
Linear
Ramp switching
braking to standstill

By DC injection

protection type

Drive: thermal protection

Drive: overcurrent between output phases and earth
Drive: input phase breaks
Drive: overheating protection
Drive: short-circuit between motor phases
frequency resolution

Display unit: 0.1 Hz

Analog input: 0.012/50 Hz
electrical connection

Control, screw terminal: 0.5...1.5 mm² AWG 20...AWG 16

Motor/braking resistor, screw terminal: 2.5...6 mm² AWG 14...AWG 10
Power supply, screw terminal: 2.5...6 mm² AWG 14...AWG 10
connector type

1 RJ45 for Modbus/CANopen on control terminal

physical interface

2-wire RS 485 for Modbus

transmission frame

RTU for Modbus

transmission rate

4.8, 9.6, 19.2, 38.4 kbit/s for Modbus

50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen
data format

8 bits, configurable odd, even or no parity for Modbus

type of polarization

No impedance for Modbus

number of addresses

1...247 for Modbus

1...127 for CANopen
method of access

Slave for CANopen

supply

Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC (+/- 5 %) current <= 10 mA (overload and short-circuit protection)

local signalling

1 LED green for CANopen run

1 LED red for CANopen error
1 LED red for drive fault
width

140 mm

height

184 mm

227.9 mm with EMC plate
depth

158 mm

product weight

2.1 kg

analogue input number

3

analogue input type

Voltage (AI1): 0...10 V DC, impedance 30000 Ohm, resolution 10 bits

Bipolar differential voltage (AI2): +/- 10 V DC, impedance 30000 Ohm, resolution 10 bits
Current (AI3): 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration), impedance 250 Ohm, resolution 10 bits
discrete input number

7

discrete input type

Programmable (sink/source) (DI1...DI4): 24...30 V DC: level 1 PLC

Programmable as pulse input 20 kpps (DI5): 24...30 V DC: level 1 PLC
Switch-configurable PTC probe (DI6): 24...30 V DC
Safe torque off (STO): 24...30 V DC, impedance 1500 Ohm
discrete input logic

Negative logic (sink): : DI1...DI6, > 19 V (state 0) < 13 V (state 1)

Positive logic (source): : DI1...DI6, < 5 V (state 0) > 11 V (state 1)
analogue output number

1

analogue output type

Software-configurable current (AQ1): 0...20 mA, impedance 800 Ohm, resolution 10 bits

Software-configurable voltage (AQ1): 0...10 V, impedance 470 Ohm, resolution 10 bits
sampling duration

Analog input (AI1, AI2, AI3): 2 ms

Analog output (AQ1): 2 ms
accuracy

Analog input AI1, AI2, AI3: +/- 0.2 % for a temperature of -10...60 °C

Analog input AI1, AI2, AI3: +/- 0.5 % for a temperature of 25 °C
Analog output AQ1: +/- 1 % for a temperature of 25 °C
Analog output AQ1: +/- 2 % for a temperature of -10...60 °C
linearity error

Analog input (AI1, AI2, AI3): +/- 0.2...0.5 % of maximum value

Analog output (AQ1): +/- 0.3 %
discrete output number

3

discrete output type

Configurable relay logic NO/NC (R1A, R1B, R1C): electrical durability 100000 cycles

Configurable relay logic NO (R2A, R2B): electrical durability 100000 cycles
Logic (LO)
refresh time

Logic input (DI1...DI6): 8 ms (+/- 0.7 ms)

Relay output (R1A, R1B, R1C): 2 ms
Relay output (R2A, R2C): 2 ms
minimum switching current

Relay output (R1, R2): 5 mA at 24 V DC

maximum switching current

Relay output (R1) on resistive load (cos phi = 1: 3 A at 250 V AC

Relay output (R1) on resistive load (cos phi = 1: 4 A at 30 V DC
Relay output (R1, R2) on inductive load (cos phi = 0.4: 2 A at 250 V AC
Relay output (R1, R2) on inductive load (cos phi = 0.4: 2 A at 30 V DC
Relay output (R2) on resistive load (cos phi = 1: 5 A at 250 V AC
Relay output (R2) on resistive load (cos phi = 1: 5 A at 30 V DC
specific application

Machinery

Variable speed drive application selection

Hoisting self erecting

Material handling carousel
Material handling conveyor
Material handling lifting platfrom
Material handling palletizers - medium performance
Material handling transfer table
Material handling turn table
Material working (wood, ceramic, stone, pvc, metal) cutting - medium accuracy
Material working (wood, ceramic, stone, pvc, metal) drilling
Material working (wood, ceramic, stone, pvc, metal) saw
Packaging bagging
Packaging feed conveyor low performance
Packaging filling bottles - intermittent operation
Packaging linear labeling
Packaging other application
Packaging stretching wrapping
Packaging tray take
Textile knitting
Textile printing machines
Textile spinning
Washing machines car
Washing machines other application
Hoisting standard crane - travelling or trolley
Motor power range

2.2...3 kW 380...440 V 3 phases

2.2...3 kW 480...500 V 3 phases
motor starter type

Variable speed drive

Environment
isolation

Between power and control terminals

insulation resistance

> 1 mOhm at 500 V DC for 1 minute to earth

noise level

52 dB conforming to 86/188/EEC

power dissipation in W

76 W (fan) at 380 V, 4 kHz

volume of cooling air

37.7 m3/h

operating position

Vertical +/- 10 degree

electromagnetic compatibility

Conducted radio-frequency immunity test conforming to IEC 61000-4-6 level 3

Electrical fast transient/burst immunity test conforming to IEC 61000-4-4 level 4
Electrostatic discharge immunity test conforming to IEC 61000-4-2 level 3
Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3 level 3
Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
1.2/50 µs - 8/20 µs surge immunity test conforming to IEC 61000-4-5 level 3
pollution degree

2 conforming to EN/IEC 61800-5-1

vibration resistance

1.5 mm peak to peak (f = 2...13 Hz) conforming to EN/IEC 60068-2-6

1 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-6
shock resistance

15 gn during 11 ms conforming to EN/IEC 60068-2-27

relative humidity

5...95 % without condensation conforming to IEC 60068-2-3

5...95 % without dripping water conforming to IEC 60068-2-3
ambient air temperature for operation

-10...50 °C without derating

50...60 °C with derating factor
ambient air temperature for storage

-25...70 °C

operating altitude

<= 1000 m without derating

1000...3000 m with current derating 1 % per 100 m
environmental characteristic

Chemical pollution resistance class 3C3 EN/IEC 60721-3-3

Dust pollution resistance class 3S2 EN/IEC 60721-3-3
standards

EN/IEC 61800-3

EN/IEC 61800-3 environment 1 category C2
EN/IEC 61800-5-1
IEC 60721-3
IEC 61508
IEC 13849-1
product certifications

CSA

NOM 117
UL
RCM
EAC
marking

CE

Schneider ATV320U22N4C
Documents & Downloads
Product datasheet
Instruction sheet
Catalogue