Skip to content
PHOENIX TECHNOLOGIES, BANGALORE | 📞 Call us on 080 42100546, Mob : 7760459320 | Email : info@phoenixtechnologies.org
PHOENIX TECHNOLOGIES, BANGALORE | 📞 Call us on 080 42100546, Mob : 7760459320 | Email : info@phoenixtechnologies.org

Delta DVP20SX211R

Rs. 0.00
SKU DVP20SX211R
The DVP-SX2 Series is Delta Electronics' second generation of slimline industrial PLCs. The DVP-20SX211R features built-in analog inputs, analog outputs, high speed counters and pulse outputs, a flexible serial port and expansion ports on both sides. Expansion modules can be mounted on the left (high speed expansion) or right (low speed general purpose modules) of the PLC without external wiring.

Two small potentiometers on the front of the unit can be read as an additional 2 analog inputs with 8-bit resolution. The DVP-20SX211R supports PID loops with automatic tuning for process control applications.

The programming software runs on Windows and is freely available for download.

Specifications:
  • Power: 20.4 to 28.8 VDC
  • Digital Inputs: 8 × 24 VDC sink or source¹
  • Digital Outputs: 2 banks of 3 relays with shared commons
  • Output Rating: 250 VAC/ 30VDC, 1.5 A each relay, 5 A each bank
  • Analog Inputs: 4 × ±10 VDC or ±20 mA (inc. 4 to 20 mA)
  • Analog Input Resolution: 12 bit (5 mV / 10 µA)²
  • Analog Output: 2 × ±10 VDC or ±20 mA (inc. 4 to 20 mA)
  • Analog Output Resolution: 12 bit (5 mV / 10 µA)²
  • Communication Port: RS-232 and RS-485, Modbus ASCII/RTU master or slave
  • Program Capacity: 16k steps
  • IO Points: Up to 230 via expansion modules
  • Software Up/Down Counters: Any input, up to 10 kHz on a single input
  • Software Quadrature Inputs: 3 - X0/X2 (15 kHz), X4/X5 (5 kHz) and X6/X7 (5 kHz)
  • Hardware Up/Down Counters: 2 - X0 and X2, both 100 kHz
  • Hardware Quadrature Inputs: 2 - X0/X1 and X2/X3, both 10 kHz
Note 1: The digital inputs can be wired so all are NPN or all are PNP type inputs.

Note 2: Effectively ~11 bits in 4 to 20 mA mode

Applications:
Used for PID temperature/humidity control, 2-axis AC motor drive constant speed control, temperature control using a analog signal monitoring of a whole factory. (PLC EASY LINK).